300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
9. Loosen hex. screws (arrows) of lower suspension on semi-trailing arm and remove spring strut in downward direction.
10. Remove lower rubber mount of upper suspension components from spring strut.
Installation
1st version only
1st version
5
Spring strut
5c
Upper rubber mount
5d
Lower rubber mount
5f
Dust guard
5g
Hex. screw
5h
Spring washer
5p
Ball joint
5q
Screw connection
B3
Pressure line (pressure hose) pressure reservoir - spring strut
11. Move rear end of vehicle into level specified for loaded vehicle. For this purpose, measure semi-trailing arm position of rear axle and load rear end
accordingly by placing weights into passenger compartment. (For values refer to table "vehicle level on rear axle under load").