300TD (123.193) L5-3.0L DSL Turbo (617.952) (1984)
25
Mount propeller shaft to universal flange of drive pinion.
26
Attach propeller shaft intermediate bearing to frame floor, but do not yet tighten.
27
Vehicles with ABS
a) Renew O-ring (36) on rpm sensor (34).
34 Rpm sensor
35 Hex. socket screw
36 O-ring
43 Gear wheel (rotor)
44 Drive pinion
45 Rear axle housing
Note: Prior to installation make sure that no metallic foreign particles are located on magnetic edge of rpm sensor.