300TE (124.090) L6-3.0L (103.983) (1989)
/l6-3.0l_(103.983)/Page-2571002.png)
6. Separate rivet head (3 each) and completely remove gears.
Installation note
Insert gear housing into backrest frame. Make sure that the locking pin is inserted in backrest frame and that the gear housing rests flat against backrest
frame.
Fasten gear housing with rivet 4x6. 1 (3 each), part no. 910002 004132.
Handwheel (8) and cover (9) must be renewed following disassembly.
7. For installation proceed vice versa.
