300TE (124.090) L6-3.0L (103.983) (1989)
Parking Brake Cable: Service and Repair
RA42001240525X Remove/Install Rear Brake Control Cable
Removal and installation of rear brake control cable
Preceding work:
Remove brake shoes for parking brake (42-0530).
Remove rear exhaust heat shield (49-0100).
-
Remove rear exhaust heat shield.
-
Unhook return spring (94) on holder (95).
-
Turn adjustment screw (89) back on adjustment bracket (87).
-
Remove front brake control cable (85) on intermediate lever (91). Replace self-locking hex. head bolt (93).
-
Unhook intermediate lever (91) on mount (88) on frame floor.
-
Unhook brake control cables (86) on lever (92).
-
Remove spring clip (84). Pull brake control cable (86) out of holder (95).
-
Remove spreader lock (109) by pulling out pin (114).
-
Screw self-locking hex. head bolt (98) out on wheel carrier. When installing use new self-locking hex. head bolt. Remove brake control cable
(86).
-
Adjust parking brake after installing rear brake control cable. See: Adjustments