300TE (124.090) L6-3.0L (103.983) (1989)
Blower Motor Resistor: Service and Repair
Removal and installation of electronic blower regulator
-
Remove wiper system.
-
Pull outside air temperature sensor (B10/5) out (Fig. 1)
-
Remove cover (1), unclipping 8 clips (arrow) (Fig. 1)
-
Unclip retaining strap (2) (Fig. 2)
-
Pull flat plug on blower motor off and remove blower motor (M2, Fig. 2)
-
Remove holder (3), unscrewing 3 screws (4, Fig. 3)
-
Unscrew screws (5 and 6) (Fig. 4)
-
Carefully lift housing in the area (arrow) and remove blower regulator (N29) at the side (Fig. 5)
-
Install in reverse order