300TE (124.090) L6-3.0L (103.983) (1989)
Fuel Filter: Service and Repair
REPLACING FUEL FILTER
-
Remove protective cover by removing mounting bolts (arrows).
With Single Fuel Pump
With Dual Fuel Pumps
-
Disconnect fuel line and fuel hose.
-
Loosen mounting screws (arrow) pivot holder down and remove filter.
-
Install new fuel filter and plastic sleeve in flow direction.
-
Sleeve should project on both sides of the holder since contact corrosion may occur if there is direct contact with the holder.
-
Replace plastic sleeve, if necessary.
-
Additional plastic sleeve is required.
-
Reinstall protective cover.