380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1524002.png)
^
In the case of diesel engines, it is also necessary to protect the vacuum pump and mask off the vent holes in the valve cover (arrows, Figures 1
and 2) for engines (601, 602, and 603) with positive crankcase ventilation (PCV) and/or exhaust gas recirculation (EGR).
^
The control modules and generator should not be subjected to direct jet spray from a cleaning system, specifically on the drive side in the area of
the generator bearing and time belt pulley.
^
After cleaning, dry off components which may have become damp or wet.
^
Do not attempt to clean a hot engine, the engine should be cold or at most warm to the touch (specifically around exhaust components).
^
Do not apply anti-corrosion wax to the engine compartment until components are completely dry.
^
Do not apply anti-corrosion wax to exhaust system components, belts and belt pulleys.
