380SL (107.045) V8-3.8L (116.960) (1982)
116.962, 116.963 and 117.963:
Plug single plug of electric line from temperature transmitter (5) and, if screwed in, from temperature switch (3). If installed, disconnect vent hose
on connecting pipe (arrow). Loosen hose clamp (10), unscrew fastening screws (1) and remove inlet connection (8) with sealing ring and coolant
thermostat.
9
On vehicles with hydropneumatic suspension, unscrew hollow screw (5) on hydraulic oil pump and put high pressure line (6) aside.
10
Remove vibration damper. See: Engine/Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair