380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-362001.png)
Camshaft Bearing: Specifications
Tighten bolts M 10 x 165 for camshaft bearings from inside out:
first to 30 Nm initial torque
then to 60 Nm final torque.
Tighten fastening bolts M 8 to 50 Nm.
Removal
NOTE:
The rear cylinder head bolts M 10 x 165 mm (arrow) at left and right can be removed only after the camshaft bearing has been lifted.
Installation
