380SL (107.045) V8-3.8L (116.960) (1982)
Rocker Arm Assembly: Service and Repair
1 Camshaft
2 Rocker arm
3 Hydraulic valve clearance compensating element
4 Cylinder head
5 Valve guide
6 Exhaust valve
7 Valve seat ring
8 Thrust piece
9 Valve spring retainer
10 Valve cone half
11 Outer valve spring
12 Inner valve spring
13 Valve stem seal
14 Rotocap
NOTE: Install rocker arms in the same position from which they were removed.
If rocker arms are mixed up or replaced, check basic position of hydraulic valve clearance compensating elements. See: Camshaft, Lifters and Push
Rods/Lifter / Lash Adjuster/Service and Repair
When installing new rocker arms also replace the corresponding camshaft.