380SL (107.045) V8-3.8L (116.960) (1982)
4 Remove compression spring (11). guide pin (12) and piston (13).
Installation:
5
Install piston (13), guide pin (12) and compression spring (11).
6
Screw in closing plug (10) with new sealing ring and tighten to 40 Nm.
7
Install oil pan or oil pan lower part with new gasket and tighten fastening screws to 10 Nm (thread M6) or 25 Nm (thread M 8).
8
Fill in engine oil.
9
Run engine, check oil pressure, check for leaks.
10
Check oil level and correct if required.