380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-543001.png)
Ignition Rotor: Testing and Inspection
Ignition Distributor View
1. Remove the distributor cap retaining screws.
2. Remove the rotor.
3. Measure the resistance across the rotor resistor.
Reading should be 1000 ±300 ohms.
4. Replace as necessary.
5. Carefully inspect the surfaces of the rotor for possible hair line cracks or signs of burning. Also inspect the distributor rotor shaft for signs of
arching. Replace as necessary.
