380SL (107.045) V8-3.8L (116.960) (1982)
Fuel Filter: Service and Repair
REPLACING FUEL FILTER
-
Remove protective cover.
-
Disconnect fuel lines.
-
Loosen mounting screws (arrows) and remove filter.
-
Unscrew fitting from old filter and attach to new filter with new seal ring.
-
Install new fuel filter in flow direction with plastic sleeve.
-
Sleeve should project on both sides of the holder since contact corrosion may occur if there is direct contact with the holder.
-
Replace plastic sleeve, if necessary.
-
Connect steel line to filter.
-
Retighten mounting screws.
-
Check for leaks.