380SL (107.045) V8-3.8L (116.960) (1982)
Air Door Actuator / Motor: Service and Repair
Center Nozzle Flaps
VACUUM ELEMENT (4OA) FOR CENTER NOZZLE FLAP
REMOVAL:
1. Remove center console.
2. Remove instrument panel.
Supports (70 & 71), Bracket (72)
3. Remove support (70 and 71) as well as angle bracket (72).
4. Pull 2-pole coupler from temperature sensor (6).
5. Pull off vacuum line (arrow) for vacuum element of legroom flaps.
6. Disconnect cable connector terminal 58d.