380SL (107.045) V8-3.8L (116.960) (1982)
3
Remove locking ring (3).
4
Lift clutch coupler (2) from refrigerant compressor (1).
1
Refrigerant compressor
2
Clutch coupler
3
Locking ring
Installation
5
Insert clutch coupler (2) on front head member of refrigerant compressor in such a manner that the electrical connections are in alignment with the
markings previously made on refrigerant compressor.
6
Align guide pins at bottom on coupler housing with holes in front head member of refrigerant compressor.
7
Install locking ring (3) with flat side of ring in direction of coupler.
8
Install pulley and spring plate (see steps a and b).
d) SHAFT SEAL OF REFRIGERANT COMPRESSOR
Sectional View of Shaft seal and Seat of Seal