Electromagnetic Clutch Removal and Installation for 1982 380SL (107045)
Compressor Clutch: Service and Repair
Removal and Installation of Spring Plate
a) Spring plate
Removal
1
If the refrigerant compressor is removed, clamp refrigerant compressor with refrigerant compressor carrier into vise, without refrigerant
compressor carrier into holding fixture for refrigerant compressor.
2
Prevent rotation of spring plate (4) by means of holding tool (2), unscrew collar nut from shaft using 14 mm socket.
1
Refrigerant compressor
2
Holding tool
3
Socket
4
Spring plate