mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Tires - Approved Summer Replacements|Page 1347 > < Tires - Approved Summer Replacements
Page 2
background image

205/55 ZR 15

Pirelli

Uniroyal

P6

Rallye 340155

205/65 R 15

Continental

Goodyear

Michelin

Pirelli

93 H or

CH 51

Eagle NCT 65

MXV

P6

94 H Uniroyal Rallye 340/65

205/65 VR 15

Continental

Goodyear

Michelin

Pirelli

or

CV 51

Eagle

MXV

P6

205/65 R 15

NCT 65(3)

94 V Uniroyal Rallye 340/65

205/65 ZR 15

Continental
CZ 51

215/65 VR 15

Pirelli

or

P 600(4)

215/65 ZR 15

(1)

Not recommended for model 124 coupe.

(2)

Not recommended for 124 T-model.

(3)

Not recommended for models 126.035/037 with load leveling.

(4)

Only available as a ZR tire.

NOTE:

-

The load and speed rating of the previous VR and the new ZR tires must be sufficient for each model. Individual tire manufacturers can
confirm this.

The previous VR rated tires are now identified as are all standard tires (e.g. 205/65 R 15 94 V).

-

When replacing tires, ensure that only tires with the tire/rim match point are used. The match points are designed to keep tire/wheel
out-ofroundness within specified tolerances (See topic C. Match Points).

-

Before mounting wheels, always clean the contact surfaces of the rims and axles of dirt and corrosion.

CAUTION! In case of a wheel change (e.g., light alloy rims for steel rims), be certain that the spare lugbolts are visibly kept with the spare wheel, to
ensure proper combination of wheel and bolt.

Lugbolts for steel wheels and aluminum wheels are not interchangeable.

B.Tire Speed Ratings

Tire Rating Symbol

Highest permissible speed

Q

100 mph (160 km/h)

R

106 mph (170 km/h)

S

112 mph (180 km/h)

T

118 mph (190 km/h)

H

130 mph (210 km/h)

V(1)

149 mph (240 km/h)

ZR

over 149 mph (240 km/h)

(1)

Replaced previous VR rating for speeds over 130 mph (210 Km/h)

C.Match Points

Match points are used to reduce vehicle vibration at highway speeds caused by out-of-roundness. The tolerance for vertical or radial runout
(out-of-roundness) is 0.8 mm (see also S.I. 40/56, May 1986).

Mercedes-Benz production and replacement rims have been marked with match point as of the dates listed in the table below.

Model

Month

107/126

01/87

124

03/87

201

04/87

Tires - Approved Summer Replacements|Page 1347 > < Tires - Approved Summer Replacements