380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1177005.png)
Models 107.023, 107.024, 107.043 and 107.044 with Vickers VT 27 power steering pump
8. Loosen hex. nuts (22) at fastening plate and hex. screw (23) on support (14). Push power steering pump toward engine and take both vee-belts
from pulley (10).
9. Unscrew hex. screws and nuts and remove power steering pump including carrier.
10. Unscrew hex. nut from drive shaft while applying counterhold at flats (36 mm) of pulley.
11. Remove pulley (10) from drive shaft with puller (30).
Note:
Remove pulley only with puller 108 589 02 33 00, since otherwise the power steering pump will be damaged.
