380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1177013.png)
33. Check plastic bushings (32) in holder, renew bushings, if required.
34. Attach pump in holder (8) or carrier with hex. screw (36), but do not yet tighten.
35. Screw hex. nut on adjusting screw (25). Place vee-belt on pulley. Tension vee-belt with adjusting screw. Tighten hex. screw and hex. nut at
adjusting screw.
