380SL (107.045) V8-3.8L (116.960) (1982)
3
Lower control arm
4
Upper control arm
10
Front spring
74
Tensioning device for front spring
5. Tension front spring.
1
Front axle carrier
4
Upper control arm
10
Front spring
31
Rubber mount for front spring
6. Remove rubber mount in upward direction through opening in front axle carrier.
Installation
7. Apply lubricating fluid "Naphtalen" (part no. 000 989 04 60), if unavailable soapy water, to the outside of the new rubber mount.
8. Insert rubber mount into opening in front of axle carrier and place mount on front spring. If the spring is in contact with the front axle carrier,
centralize by means of a suitable tool.