380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-961003.png)
4
Unscrew combination screws (8), remove lower cover (13) with oil pipe (9) and intermediate plate.
Installation Note
Introduce oil pipe (9) into bore (arrow).
Insert combination screws (8) but do not tighten.
Screw in two screws (10) for locating intermediate plate (14).
Tighten combination screws (8) to 8 Nm.
Mount leaf spring (73) with holder (72). Tighten screw (71) to 8 Nm. Make sure that the locating pin for holder (72) is correctly installed.
5
Injector (118) compress both links (arrow) and remove injector.
