380SL (107.045) V8-3.8L (116.960) (1982)
Vacuum Regulator Valve: Adjustments
A. Adjustment Of Vacuum Control Valve (MW Pump)
1
Push regulating lever (1) to full throttle stop (2).
2
Loosen ball head (4) and displace in slot in such a manner that actuating lever (8) is also resting against full load stop (6).
3
Tighten ball head (4), then check once again whether both levers are reaching full load stops at the same time.
Installed up to September 1980.
4
The basic dimension (a) of connecting rod (5) is 122 mm.
Installed starting October 1980.
5
The basic dimension of the connecting rod (5) is 118 mm.
B. Adjustment Of Vacuum Control Valve (M/RSF Pump)