380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1013009.png)
12 Peen crush slot nut or double hex. collar nut with a peening tool into one of the two grooves of drive pinion in such a manner that no gap shows up
between groove and locking tab.
Attention! Blows should not be too heavy.
Dimensions for peening tool: "a" = approx. 8 mm; "b" = approx. 4 mm
13 Attach propeller shaft to flange.
14 Attach propeller shaft intermediate bearing but do not yet tighten.
15 Fill rear axle housing with oil up to level of filler hole.
