380SL (107.045) V8-3.8L (116.960) (1982)
Transmission Mount: Service and Repair
1
Nut M12 x 1.5
2
Spring washer B 12
3
Transmission flange
4
Engine mount 123 240 04 13
5
Threaded plate
6
Bracket
7
washer 8.4
8
Spring washer A 8
9
Adjusting screw M8 x 75
10
Spacer
11
Closing plate
12
Washer
13
Spring washer A8
14
Screw M8 x 32
15
washer
16
Screw M8 x 20
CAUTION:
Do not unscrew closing plate (11) when removing engine mount (4).
Attach engine mount to closing plate without tension.
Upon installation of engine mount, run engine for a short period at Idle speed with adjusting screw loose. Tighten adjusting screw (9) to 30 Nm with
engine stopped.
CAUTION: Check regulating linkage for proper function.