380SL (107.045) V8-3.8L (116.960) (1982)
Wiper Blade: Service and Repair
Profile Strip Removal
Removal and Installation of Wiper Blade Rubber Profile Strip
Removal
1
Removal wiper blade. See: Wiper Blade Removal
2
Slide rubber profile strip (21) with the two holding springs (22) with one end out of holder (b) of wiper blade (9) in direction of arrow (a).
3
Pull out both holding springs (22).
4
Remove rubber profile strip (21) from holder of wiper blade (9).
Installation
5
Loosely insert rubber profile strip (21) without holding springs (22) into a holder of wiper blade (9). Leave long end free.
6
Slip both holding springs (22) into rubber profile strip.
7
Introduce free end of rubber profile strip including holding spring into other holder of wiper blade to engage (arrow b).
8
Install wiper blade.