400SEL (140.043) V8-4.2L (119.971) (1993)
Frame (4) at selector lever
remove, install.
Screws (5)
unscrew, screw in.
Bottom cover (6)
raise at ashtray and take out to the front; insert from the front.
Electrical connections
unplug, plug in.
Switches (arrows)
unclip, clip in.
Commercially available tester
Quiescent current retention unit
e.g. Hans Zeheter CMP 12.2
Switches In Top Cover
Preliminary work:
Radio removed.
Bottom cover removed. See: Remove/Install Switches In Cover of Center Console/Switches In Bottom Cover
Quiescent current retention unit
disconnect, connect.
Screws (1)
unscrew, screw in.
Top cover (2)
raise at ashtray, take out; insert from above and push down.
Switch carrier (3)
unclip, clip in.
Switches (arrows)
pull off, plug in.
Commercially available tester