1993 Mercedes 400SEL (140043) Interior Console Service and Repair
Ashtray insert (2)
remove.
Screw (3) in ashtray housing
loosen with offset screwdriver.
Wood cover (4)
remove upward.
Screws (5 and 6)
screw out (Allen wrench WAF 4 mm, 2.5 Nm).
Cover (7)
press toward rear and lift at front. Then pry out cover toward front and up.
NOTE: Danger of damage, do not use sharp tools!
Plug connector on switch
disconnect.
Cover (7)
lay down.
Reinstall
in opposite order.
Removal and Installation
1
Press frame on selector lever console upward and out with plastic wedge
2
Open ashtray housing and remove ashtray insert.
3
Loosen screws (arrow) in ashtray housing with offset screwdriver.
4
Remove wooden cover (4) upward.