500SEL (126.037) V8-5.0L (117.963) (1984)
3 Unscrew fastening bolts (22) of element, take element out of door.
4 For installation proceed vice versa.
Adjusting switching rod
5 Pull out safety pin of door as far as stop (unlock).
6 With sliding sleeve (arrow) pushed back, insert switching rod without preload into rod connection of element and slip sliding sleeve (arrow) in
upward direction as far as stop.
Removing/Installing Rear Door Element
Removal and installation of rear door element
A. 1st version up to approx. 02/83
Removal
1 Remove door lining. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair