500SEL (126.037) V8-5.0L (117.963) (1984)
-
Remove door lining (5). See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
-
Push back sliding sleeve (2).
-
Push out control rod (3).
-
Loosen screws (4).
-
Disconnect element (1).
-
Pull off pneumatic pipe (6).
-
Check contour hose (7) for damage.
-
Check pneumatic function of the element (1).
-
Bring element (1) in installation position. Fully push back sliding sleeve (2) and pull control rod attachment (8) out until it engages.
-
Install in reverse order.