500SEL (126.037) V8-5.0L (117.963) (1984)
2
Unscrew shielding plates on exhaust manifold
Exhaust Manifold, Left (Steps 3 - 5)
3
Remove clamp for transverse tube.
4
Unscrew exhaust gas recirculation line on valve.
5
Unscrew exhaust nuts and screws and remove Exhaust manifold, left.
Exhaust Manifold, Right (Steps 6 - 9):
6
Remove exhaust system. See: Service and Repair
7
Remove clamp for transverse tube.
8
Remove air cleaner.
9
Unscrew exhaust nuts and screws and remove exhaust manifold.
Installation:
10
For installation proceed vice versa. Renew all gaskets and exhaust nuts. Before tightening, put on screws for holder. Flange transverse tube before
exhaust manifold is tightened.