500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1119003.png)
8. Loosen mounting clamp (15). Disconnect plug connector on contact switch (8).
9. Press arresting pin (arrow) in. Pull steering wheel lock (1) slightly out of mount in jacket tube, turn and remove completely from mount in jacket
tube.
Installation note: Insert steering wheel lock into mount in jacket tube. Turn lock until arresting pin (10) engages in hole in mount.
10. Insert lock cylinder (5), turn to position "1" and remove contact switch (8) from steering wheel lock (1).
