500SEL (126.037) V8-5.0L (117.963) (1984)
2
On vehicles starting August 1982 the front and the rear propeller shaft are marked in relation to each other (arrows).
Note: The identification has been partially already in place on propeller shafts prior to August 1982, but has not been taken into consideration
during assembly. For this reason, propeller shafts on which the marking is not in agreement, must be identified prior to removal and the two parts
must be plugged together again following this identification.
3
Separate front and rear propeller shaft on clamping connection.
Rubber Mount With Outer V-fold
4
Pull off rubber sleeve (3) over splining.