560SEL (126.039) V8-5.6L (117.968) (1986)
3. Knock door handle forward by a blow with ball of thumb or, if required, with a suitable piece of wood and a hammer.
4. Insert ignition key into door lock, turn ignition key for approx. 50° to the rear and remove door handle.
Note: If the closing cylinder cannot be turned, removal of door handle requires unscrewing of door lock fastening screws and disconnection of
pull rod for inside actuation and of safety linkage on lock. Then turn luck around pivot of door handle until door handle can be removed from
turning nut in lock.
Installation