560SEL (126.039) V8-5.6L (117.968) (1986)
/v8-5.6l_(117.968)/Page-646004.png)
3
Remove burr from edge of radial sealing ring seat.
4
Pull in radial sealing ring by means of installation sleeve (1). For installing, use the hexagon head bolt (107) for mounting hub to crankshaft and
one diaphragm spring (106).
The radial sealing ring must be positioned at right angles to the crankshaft journal.
NOTE: Hubs with running grooves from the radial sealing ring must be renewed
5
Install hub, vibration damper and V-belt pulley.
The bolt M 18 x 1.5 x 45 (4) is installed with 4 diaphragm springs (2nd version) (see note at the beginning of this article).
