Location of Combination Switch for Turn Signals on 1986 560SEL (126039)
Combination Switch: Service and Repair
Fig. 4 Combination switch replacement
107 SERIES
The steering wheel does not have to be removed to replace the combination switch.
1.
Disconnect battery ground cable.
2.
Remove rubber sleeve from combination switch.
3.
Remove two combination switch attaching screws.
4.
Pull combination switch out slightly, then disconnect the two screw type and one plug type electrical connectors and remove switch from vehicle,
Fig. 4.
5.
Reverse procedure to install.
Fig. 5 Combination switch replacement.
126 SERIES
1.
Disconnect battery ground cable.
2.
Remove steering wheel.
3.
Remove instrument panel lower cover.
4.
Remove three combination switch attaching screws, Fig. 5.
5.
Disconnect 14 terminal electrical connector under instrument panel.
6.
Remove combination switch from vehicle.
7.
Reverse procedure to install.