560SEL (126.039) V8-5.6L (117.968) (1986)
3
Pull single-plug connection of electric line for oil pressure indication in instrument cluster from oil pressure transmitter.
4
Unscrew fastening screws for oil filter and remove oil filter.
5
Remove remains of gasket from flange surface on crankcase.
First close openings (arrows) so that no remains of gasket can enter the oil ducts in the crankcase.
Installation:
6
Position the oil filter with new gasket and tighten fastening screws to 25 Nm.
7
Plug single-plug connection of electric line for oil pressure indication in instrument cluster onto oil pressure transmitter.
8
On engines 116.961 standard version and 117.961/968 and special protection vehicles, connect oil cooler lines to oil filter housing and tighten
coupling nuts to 25 Nm. Install pipe elbow between oil filter and damper.
9
If necessary, replace seal of central bolt and oil filter element. Fit on oil filter cap with new O-ring and tighten central bolt to 35 Nm.
10
Run engine and check for leaks.
11
Check oil level and correct if required.