560SL (107.048) V8-5.6L (117.967) (1989)
Intake Manifold: Service and Repair
Removing and Installing Intake Manifold
Intake manifold removal, installation and gasket replacement
Battery
Disconnect, reconnect.
Mixture control unit with air guide housing
Remove, reinstall.
Coolant
Partly drain, refill. See: Cooling System/Service and Repair
Shaped hoses (26) for auxiliary air
Remove, reinstall.
Engine wiring harness
Lace out, lace in.
Engine longitudinal control shaft
Remove, reinstall.
Bracket (1) for injection valves
Remove, reinstall.
Bowden cable for automatic transmission
Disconnect, reconnect.
Bearing bracket for control
Remove, reinstall.
All vacuum connections
Remove, reinstall.
Exhaust gas recirculation line on exhaust gas recirculation valve
Disconnect, reconnect.
Mounting screws
Remove, refit. Tighten screws from inside to the outside.
Coolant hose (2)
Loosen.
Intake manifold upper and lower parts (10 and 18)