560SL (107.048) V8-5.6L (117.967) (1989)
Crankshaft Position Sensor: Adjustments
Checking and Correcting Setting of TDC Sensor:
NOTE: With the crankshaft at 20 ° after TDC, the TDC transmitter must be positioned exactly above the pin in the vibration damper (arrow).
The adjustment of the TDC transmitter must be checked and corrected
a) when renewing the TDC transmitter adjusting slide
b) when renewing the crankshaft with hub and vibration damper
c) when renewing the timing case cover
d) when completing partly assembled engines.
Checking
1
Loosen power steering pump, remove V-belt, swing power steering pump to the inside.
2
On vehicles with air conditioning or automatic climate control, remove refrigerant compressor with carrier.