560SL (107.048) V8-5.6L (117.967) (1989)
5. Unscrew securing nut (3).
6. Take out wiper motor.
Installing
Note: Before installing the wiper motor (3), replace the rubber seal and the serrated rings and the three securing pins.
7. Installation of the wiper motor is performed in reverse order.
Note: The wiper motor must be in the park position. Plug in coupling and allow wiper motor to run to park position, if necessary.
8. Fit crank arm (2) onto wiper motor shaft and align.
9. Screw in nut and tighten to 19 Nm.