C 230 Antenna Amplifier Component Location
12
Remove adhesive residues from rear window
13
Remove adhesive pad and adhesive residues on underside of rear window antenna amplifier module 1 (A2/71)
NOTE: Installation: When sticking on the antenna amplifier module, ensure that it is fitted onto the rear window immediately after pulling off the
protective sheeting on the adhesive pad. After fitting on, apply a load of approx. 1 N/sq.cm to the antenna amplifier module for about 5 seconds.
14
Install in the reverse order
15
Make electrical system operational
Special Tools
Assembly Wedge, P/N # 110 589 03 59 00
Commercially Available Tools
Commercially Available Tools