C 230 (203.040) L4-1.8L SC (271.948) (2005)
All vehicles
3
Position bracket (12) with SDAR control unit (1) on weld stud as per picture.
4
Secure bracket (12) to weld stud using plastic nut (48).
5
Secure bracket (12) to longitudinal member using bolt (43).
6
Connect antenna plug (9) of antenna extension line (8) as per picture onto SDAR control unit (1).
7
Connect coupling housing (63) with SDAR wiring harness and MOST fiber optic cable to SDAR control unit (1) as per picture.
8
Attach self-adhesive felt as chafe protection to edges (see arrows) of bracket (12).
9
On vehicles with model year 2006 (code 806) without sound system (code 810), fit styrofoam block on bracket (12) in place of sound amplifier
(A2/13).
Shown on model 203.0 with sound system (code 810)