C 230 (203.040) L4-1.8L SC (271.948) (2005)
11.
Insert the pin (A, Figure 3) of the brown wire into pin 1" (A, Figure 5) of the connector for the trunk lock microswitch.
12.
Insert a pin (C, Figure 3) of the black wire into pin 2" (B, Figure 5) of the connector for the trunk lock microswitch.
13.
Lock the connector crimp lock.
14.
Wrap the brown wire and black wire together with electrical tape starting 30 mm (A, Figure 6) from the connector (B, Figure 6) for the trunk lid
microswitch back 1 600 mm (C, Figure 6).
15.
Reinstall the trunk lid lock.
^
See WIS document AR88.50-P-5020P, "Remove/install and adjust trunk lid lock and striker eye"