C 230 (203.040) L4-1.8L SC (271.948) (2005)
Blower Motor Resistor: Service and Repair
AR83.25-P-1220P Remove/Install Electronic Blower Control Unit
Shown on Model 203.0
1
Remove blower motor (A32m1) See: Blower Motor/Service and Repair
CAUTION: Do not lay blower motor (A32m1) on the fan wheel.
2
Extract plug (1)
3
Unscrew bolt beneath plug (1)
4
Pull blower motor (A32m1) from housing (2) in direction of arrow
5
Unscrew bolts (3)
-
See "Special Tools" given below.
6
Remove electronic blower control unit (A32n1)
7
Remove coupling (4) from blower motor (A32m1)
8
Install in the reverse order.
Special Tools
Torx bit set, P/N# 000 559 01 10 00