C 230 (203.040) L4-1.8L SC (271.948) (2005)
Front Steering Knuckle: Removal and Replacement
AR33.25-P-0400P Remove/Install Steering Knuckle
- except CODE (P98) Black Series [model 209.3]
DANGER:
-
Lethal injuries are possible if vehicle slips off of lifting platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
1
Raise vehicle.
2
Remove front wheel
3
Remove brake rotor
4
Remove front wheel hub
5
Detach brake caliper dust shield
6
Remove wheelspeed sensor
7
Remove track rod from steering knuckle assembly
8
Remove transverse link from steering knuckle assembly
NOTE: Use suitable punch to push out ball joint stud.
9
Remove radius rod from steering knuckle assembly
NOTE: Use suitable punch to push out ball joint stud
10
Remove steering knuckle assembly from strut
11
Remove steering knuckle assembly
12
Install in the reverse order