C 230 (203.040) L4-1.8L SC (271.948) (2005)
The exhaust valves no longer need to be replaced.
11. Remove the injection valves and replace with six-hole injection valves.
12. Install spark plugs.
13. Flash engine control unit and perform SCN coding.
Note:
Use latest DAS release.
14. Perform cylinder compression leakage test and compare values of the individual cylinders.
15. If the exhaust valve seats are leaking, replace the cylinder head.
Note:
Only if the cylinder compression pressure loss between cylinders exceeded 20%.
Note:
If above repair methods are not complied with, we reserve the right to debit any warranty claims.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
January 23, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.