C 230 (203.040) L4-1.8L SC (271.948) (2005)
5.
Screw on both caps for the rubber mounts (Figures 2 and 3). Use a new bracket if the torsion bar diameters are 20 mm and 21 mm.
6.
Reinstall the torsion bar and lower engine paneling in reverse order.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
November 2, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In case of warranty, use the table.