C 230 (203.040) L4-1.8L SC (271.948) (2005)
Clutch Pedal Assembly: Customer Interest
M/T - Clutch Pedal Cracking/Squeaking When Operated
Date: April 11, 2008
Order No.: P-B-29.10/02
Supersedes:
Group: 29
SUBJECT:
Model 171.454/456
Model 203.040/061/064/740/747
Model 204.054/056
Equipped with Manual Transmission Only (716.6)
Noise (Cracking/Squeaking) When Operating Clutch Pedal
If you receive customer reports in the above model vehicles of noise (cracking/squeaking) when operating the clutch pedal, the cause may be insufficient
grease on the over-center spring and pin. To resolve, perform the following. For further reference, see WIS document AR29.10-D-0300-01
(Remove/install over-center spring of clutch petal) located on Star TekInfo --> Temporary Postings.
1.
Apply grease to contact surfaces of over-center spring at bottom (Figure 1) and top (Figure 2).
2.
Grease guide of over-center spring as shown in Figure 3.
3.
Grease mounting pin as shown in Figure 4.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
April 11, 2008. Please refer to Netstar --> Star TekInfo Star Time for the most current labor time allowance.