C 230 (203.040) L4-1.8L SC (271.948) (2005)
Component Identification
Illustrated on model 140
1
Mount rubber mount (60b) and short plate with 14 mm height (60a) at the top in the rear axle carrier (1).
2
Mount rubber mount with guide collar (60c) and long plate with 17 mm height (60d) at the bottom, pay attention to proper seating of bearing.
3
Mount assigned shim (60e) between plate (60d) and rear axle differential (50).
4
Replace self-locking hexagon nut (52), mount rear axle differential (50) on rear axle carrier (1).
Component Identification
Installation model 129
On vehicles with automatic transmission up to approx. 08/89 install short plate with 14 mm height (60a) at the top and long plate with 17 mm height
(60d) at the bottom.
On vehicles with automatic transmission as of 09/89 and on vehicles with manual transmission both plates (60a, 60d) have a height of 15 mm.
Mount assigned shim (60e with notches) towards rear axle differential (50).