C 230 (203.040) L4-1.8L SC (271.948) (2005)
Rear axle differential
Repair materials
Component Identification
1
Clean area around oil filler screw (50g).
Only carry out the oil level check at interior temperature and not on a rear axle center assembly which is at operating temperature. Otherwise,
when the rear axle differential is at operating temperature, required oil could escape.
2
Remove oil filler screw (50g)
Replace oil filler screw (50g).
3
If necessary collect oil running out and allow to run out until oil only drips out of opening.
Shown on rear axle differential dia. 198 mm
4
Check oil level.
Correct oil level=underside of filler opening, refill if necessary.