C 230 (203.040) L4-1.8L SC (271.948) (2005)
8
Unscrew wiring harness (6) (arrows) and expose as far as hydraulic pump
NOTE: Installation: Route hydraulic pump cable in the slot for the wiring harness.
9
Unscrew pressure line (2) from hydraulic pump (3)
10
Unscrew hydraulic pump (3)
NOTE: Installation: Route cable between transmission housing and hydraulic pump.
-
Do not trap the cable.
11
Disconnect suction line (4)
12
Install in the reverse order
13
Check and correct hydraulic oil level